What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
Basic Specification to all build Kit
- Frame w/ Fox Float X2 Shock
- Fox Float Factory 36 Grip2 | 15QRx110 - 160 (29")
- Ibis S35 29" alloy wheelset (Ibis S35 29" i9 carbon wheelset on XX1 AXS Build kit)
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy, click here.
The Ripmo V2 is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiff ness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A polycarbonate downtube protector deflects debris, while molded rubber swing arm protectors keep things quiet and clean. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
|Fork||Fox Float 36 Factory Series 160mm, 29”, 110x15. Fox Factory 38 shipping late Fall.|
|Shock||Fox Float Factory Series, X2 with EVOL, 210 x 55|
|Wheels||Ibis S35 Aluminum / 29" / Ibis Hubs|
|Tires||Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi|
|Brakes||Shimano SLX M7120 4p|
|Brake Rotors||Shimano SM-RT66 203/180|
|Cranks||Shimano SLX M7100 24mm spindle, 30t Alloy Ring S/M: 170mm, L/XL: 175mm|
|Bottom Bracket||Shimano SLX BB52|
|Rear Derailleur||Shimano SLX M7100 Shadow Plus|
|Shift Levers||Shimano SLX M7100|
|Cassette||Shimano SLX, 10-51T|
|Chain||Shimano SLX M7100|
|Headset||Cane Creek 40 ZS44/ZS56|
|Grips||Lizard Skin Charger|
|Handlebar||Ibis 780mm Alloy|
|Stem||Ibis 31.8mm S/M: 40mm, L/XL: 50mm|
|Seatpost||Bike Yoke Revive Dropper S: 125mm, M: 160mm, L/XL: 185mm. Note there is a 250lb rider weight limit on this post.|
|Saddle||WTB Silverado 142|