Yeti LTe X0 AXS T-Series 2027
Full-Power Enduro-eMTB · 160/170 mm · Bosch CX-R · 800 Wh
Cyklar och ramar i kartong: 399 kr i originalkartong eller 799 kr färdigbyggd i stor cykelkartong.
Leveranstiden beror på lagerstatus – se produktens lagermeddelande.
LeveransinformationBikes currently in stock at Yeti: delivery in 10–15 working days from payment. For incoming bikes, this period starts once the bike is available at Yeti and payment is received.
Einen Experten fragen
Das LTe ist Yetis Enduro-eMTB mit voller Leistung. Es kombiniert 160 mm Federweg am Heck durch das Sixfinity-System mit einer 170 mm Fox 38 Gabel, nutzt einen Vectran-verstärkten TURQ-Carbonrahmen und wird von Boschs renntauglichem Performance Line CX-R Motor mit einem 800 Wh PowerTube-Akku angetrieben.
Yeti hat es in erster Linie als Mountainbike konzipiert. Der Sixfinity-Hinterbau mit sechs Gelenken wurde im E-EDR World Cup entwickelt und ist präzise auf die Leistung des Bosch-Motors sowie das Gesamtgewicht des Bikes abgestimmt. Das sorgt für Traktion bei steilen, technischen Anstiegen und Souveränität bei hohen Geschwindigkeiten in der Abfahrt.
Die X0 AXS-Ausstattung kombiniert ein Fox Factory-Fahrwerk, die kabellose SRAM X0 AXS Transmission und SRAM Maven Silver-Bremsen mit 200 mm Bremsscheiben. Es rollt auf DT Swiss HXC 1700-Laufrädern mit Schwalbe Gravity Pro Radialreifen und ist mit einer Fox Transfer-Variostütze sowie Yetis eigenem 800 mm Carbonlenker ausgestattet.
Dela din produktupplevelse
Din återkoppling granskas före publicering. Din e-postadress publiceras inte.
Technologie //
Funktionen

01
Sixfinity suspension
All six bars of the linkage shape the wheel path and shock rate, so acceleration, braking and traction can be tuned independently. Developed through Yeti's E-EDR World Cup racing.

02
Tuned for full power
Anti-squat is set at 101% at sag and scaled lower than on any other Yeti, so the suspension stays free under the Bosch motor's power while still supporting you when pedalling.

03
Predictable braking
Anti-rise stays linear through the travel (67% at sag), keeping the suspension active and the geometry stable when you are hard on the brakes.

04
Tunable progression
A leverage flip chip offers three settings – racy and consistent, balanced, or plush then poppy – to match your riding style and shock choice.

05
MX-ready geometry
Ships as a full 29er. A flip chip lets you run a 27.5" rear wheel with the geometry and leverage adjustment fully preserved.

06
Vectran-reinforced carbon
The TURQ Series carbon frame adds Vectran plies, a high-performance fibre similar to Kevlar, for extra impact resistance and strength.

07
Precision linkage
A precision-machined linkage with floating collet axles keeps the shock perfectly aligned for smoother action and longer bearing life, using standard-size cartridge bearings for easy service.

08
Protected and serviceable
The downtube guard shields against rock strikes and opens as an access door for battery swaps and cable service. The drive-unit guard is vented to keep the motor cool.

09
Quiet, clean routing
Clamped ports and grommets stop cable rattle and keep grit out, with moto-style brake routing possible. An integrated custom chainguide mounts at the lower pivot.

10
Integrated Kiox display
A full-colour Bosch Kiox 400C sits in the top tube, with a wireless remote and a speed sensor hidden in the rear wheel.

11
Yeti carbon cockpit
Yeti's in-house carbon bar is tuned for compliance: 800 mm wide, 35 mm rise, 9° backsweep and 5° upsweep.

12
Geometry for speed
A 64° head angle, longer reach, higher stack and long wheelbase keep the LTe calm and stable when you take the straight line through rough terrain.