Axle for Ibis Bikes
- Shipping to Continental Europe
- Lågt lager - 1 vara kvar
- Vi hem den på beställning åt dig
6061-T6 aluminum axle with hard ano finish. Available for SRAM or Shimano (142 and BOOST); pick which one you need from the drop down.
Weighs 40g
Use the SRAM version for the following 142 x 12mm Ibis models:
- Mojo HD3 with 142mm rear
- First Generation Ripley (Blue or Black/Green)
- Mojo HDR
- Mojo HDR 650b
- Tranny 29
- Mojo SL-R
- Mojo HD with 142 x 12 rear axle
- V2 Ripley (Orange or Black)
- V2 Ripley LS
- Hakka MX
Use the Boost (Shimano standard) version for:
- Ripley 4, V3, V2 with 148 Boost Swingarm
- DV9
- Mojo 3
- Mojo 4
- Mojo HD3 with 148 Boost Swingarm
- Mojo HD4
- Mojo HD5
- RipMo
- RipMo AF
- Ripley AF
-
NOTE: There is not a numerical torque figure for the Hexle. We recommend tightening the 5mm with your multi tool that you carry with you. This way you’ll be able to remove it in case of a flat out on a ride.
ANOTHER NOTE: If you are looking to retrofit your non-Ibis bike with one of our Hexle's, you'll need to know the standard or thread pitch. For some reason, our industry has decided we need three different thread pitches for through axles:
- Syntace, Specialized and DT use 12x1.0
- Shimano is 12x1.5
- Rock shox maxle is 12x1.75
Your bike manufacturer should be able to tell you which of these you need.
For reference here are the shaft lengths of all three options:
- SRAM 142: 175mm
- Shimano 142: 165mm
- Shimano 148 Boost: 171mm