The OneUp Components EDC Top Cap is screwed into the steerer tube using the EDC Top Cap tool (cassette tool) instead of a star nut, where it pretensions the headset. Then you can use the OneUp ComponentsEDC Tool System. Included is an EDC plug with hole to keep dirt out of your steerer tube.
Note: - Since the Top Cap is screwed into the steerer tube, the steerer tube must be threaded for installation using theOneUp Components EDC Tap. Therefore only aluminium steerers (not carbon or steel) are suitable for the installation of the EDC tool! - All compatibility information and installation instructions are exclusively from OneUp Components. Using the EDC Tool System on your bike may void the original manufacturer's warranty.
Top Cap Compatibility:1 1/8" steerer tubes (aluminium) Steerer Plug Compatibility:1 1/8" - 1.5" tapered steerer tube (aluminium)
- required to store OneUp EDC tools in the steerer tube - incl. EDC steerer plug - incl. spacers
Required Fork Dimensions:
Steerer Tube Length:183 - 230 mm Start Nut Diameter:24.25 mm - 24.80 mm (check with the Go, No-Go tool from theEDC tap kit) Steerer Tube Diameter (min.):22.1 mm Recommended Steerer Tube Diameter (max.):31.75 mm - 34.00 mm
- Cannondale Lefty - certain Fox 32 - Fox 34 29" 2012-2015 - Giant Overdrive 2 - w/ SRAM Pike Boost as of 2016 as well as SRAM Lyrik Boost as of 2016 the CO2cartridges might not have enough space - w/ the Öhlins RXF the EDC plug does not fit
OneUp Components ISCG 05 V2 Bash Guide - not just for Enduro racers
With the OneUp Components Bash Guide ISCG 05 V2 chain guide, chain drops will soon be a thing of the past. Especially with modern slacker bikes it is also becoming more and more important to protect the chainring. This chain guide with Bash Guide convinces with its easy installation and adjustment, with only one tool, and especially with the new flip design of the Top Guide, which can be easily folded away. OneUp Components developed it in cooperation with EWS professionals, which is why it is also used in the Enduro World Series. Of course, the ISCG 05 Bash Guide is just as suitable for your trail bike, for aggressive riders who need additional impact protection, or for Downhill use. The ISCG 05 V2 Bash Guide chain guide by OneUp comes with three different bash plates that make it compatible with chainrings with 28 to 36 teeth. It protects you against massive hits but is so light that you practically don't notice it.
Application:Enduro, All Mountain, Downhill Material: Aluminum (7075), composite, stainless steel Mount:ISCG 05 Capacity:28-30 t, 32-34 t, 36 t Chainline Adjustment:7.5 mm
- Top Guide features a tool-less flip - Mount without removing the cranks - Install and adjust with only one tool (4 mm hex key) - Compatible with standard & Boost frames - Compatible with round and oval chainrings - Incl. three bash plates - Indicator (chain link image on the inside of guide) for easier installation - Aluminum body, fiberglass-reinforced thermoplastic Top Guide, black stainless steel bolts
Manufacturer Part Number:
- 1 x OneUp Components ISCG 05 Chain Guide - 1 x OneUp Components Top Guide, black - 1 x OneUp Components 28-30 tooth bash plate - 1 x OneUp Components 32-34 tooth bash plate - 1 x OneUp Components 36 tooth bash plate
black/ISCG 05: 90 g (28-30 Z), 105 g (32-34 Z), 110 g (36 Z)
OneUp Components "Are you Enduro Bro" EDC 100cc Pump Set
The OneUp Components Never Enough EDC 100cc Pump Set is an all-round carefree package. It contains the EDC Tool System and the EDC 100cc mini-pump, whose handle easily accommodates the Everyday Carry Tool. Furthermore, the EDC Plug & Pliers set is included in the scope of delivery, which fits perfectly into the plastic cylinder of the Tool System. And for the clean and secure attachment of small parts to the frame you get the EDC Gear Strap on top.
Design: mini-pump, CO2 pump Type: high volume Pressure (max.): 3.45 bar (50 psi) Valve Head: Presta valve
Pump Dimensions: 32 mm x 254 mm Air Volume: 100 cm3 Pump Material: aluminium (6061-T6) EDC Tool Material: aluminium, composite, steel Plug & Pliers Material: aluminium, steel, composite Gear Strap Material: polyurethane Gear Strap Length: 355 mm
EDC Tool System: - 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm hex tools* - Torx T25* - flat head screwdriver* - EDC top cap tool* - #0, #1, #2, #3 spoke wrenches - Presta valve tool - tyre levers - chain tool - space for chain master links - extra storage
Pump: - high volume mini-pump w/ Fast-On valve head, removable - can also be used as a CO2 pump - a CO2 cartridge (20 g) can be screwed into the cap - storage for the EDC tool (w/ storage capsule but w/o cartridge) - textured surface - fully sealed, weather-proof internals - patent pending - incl. bottle cage mount
EDC Tool System: - incl. all the important tools - prongs on the multi-tool arm work as a cassette lockring tool & to preload the headset - space for a CO2 cartridge (12, 16 or 20 g) - secure, rattle-free system - innovative 8 mm hex tool design - patent pending
EDC Plug & Pliers: - master link pliers for 10-speed, 11-speed, 12-speed - 15 bacon strips for tubeless use - inserting tool - can be stored in the composite cylinder of the Tool
EDC Gear Strap: - compatible with all bikes - doesn't absorb water or mud as a hook & loop fastener strap does - doesn't scratch the frame
The first part of the colour listing refers to the pump (black), the second to the EDC Tool System (green).
Manufacturer Part Number:
1C0317 + 1C0415GRN + 1C0540 + 1C0441GRY
The OneUp Components Never Enough EDC 100cc Pump Set includes: - 1 x OneUp Components 100cc mini-pump - 1 x pump mount - 1 x OneUp Components storage capsule - 1 x OneUp Components multi-tool - 1 x tyre lever - 1 x OneUp Components composite cylinder - 1 x OneUp Components Quick Link breaker pliers - 1 x OneUp Components jabber tool - 15 x OneUp Components bacon strips - 2 x OneUp Components EDC gear straps
OneUp Components Dropper Post V2 remote - reliable and versatile
The OneUp Components Dropper Post V2 remote is made of aluminium, has an oversized bearing and stands for super smooth function. Its unique lever position allows you to maintain a secure grip on the handlebars when operating your dropper post. This way you don't have to think twice about dropping our Dropper Post, even in technical terrain. This is because the remote lever by OneUp takes a similar position to the lever for shifting up, not to the lever for shifting down, as it is the case with most other remotes. This position naturally requires a much smaller thumb movement. The cable of the Dropper Post handlebar remote can be adjusted quickly and easily. It is clamped on the lever, so that shortening the cable housing for clean cable routing is child's play.
OneUp Components EDC Tool System - a steerer tube or frame pump tool box
OneUp Components EDC Tool System is the name of the clever solution for all those who do not want to carry important tools in their backpack. The EDC Tool (Everyday Carry Tool) can be hidden in the tapered steerer tube and thus makes use of exactly that free space that nobody has ever thought to use before. Alternatively, you can store it, very simply and practically, in the OneUp Components mini-pumps for on the go. EDC includes a multi-tool, chain tool, and tire lever and is ready for use at any time with just a few hand movements. A special headset cap (not included) is screwed into the steerer tube instead of the star nut using the cassette tool and pretensions the headset. The tools are clipped into a plastic housing for transport and simply inserted into the steerer tube. A further hollow cylinder, which offers space for cable ties, patches, or other small parts, can be connected. Alternatively, there is also room for a CO2 cartridge. The OneUp EDC Tool-System is very safe and protected against rattling and falling out. It has already been successfully tested by Richie Rude in the Enduro World Series.
Note: - Since the Top Cap is screwed into the steerer tube, the steerer tube must be threaded for installation using the tap kit. Therefore only aluminum steerers (not carbon or steel) are suitable for the installation of the EDC tool! - All compatibility information and installation instructions are exclusively from OneUp Components. Using the EDC Tool System on your bike may void the original manufacturer's warranty. - If you don't want to store the EDC tool in the steerer tube, the OneUp Components 100cc or 70cc pumps are great alternatives.
When purchasing in combination with an Ibis or Yeti Cycles bike, we offer free installation so you do not have to purchase the tap kit.
The OneUp Dropper post is now available in120mm, 150mm, 180mm, and 210mm lengthsand all can be shimmed down in travel by 10 or 20mm.
We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the shortest stack height and the shortest total length of any dropper post. No other post can get your saddle lower.
Still starting from SEK 2179, cable-actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom-tune your post to dial in your perfect length.
The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class-leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp.
Travel adjust shims allow you to custom-tune your post to dial in your perfect length. Cable actuated for easy installation and a simple no bleed remote Ergonomic remote paddle position Reliable sealed cartridge internals User-replaceable cartridge only SEK629 Easy to service at home 2 year warranty
Shortest total length of any dropper Shortest stack height of any dropper New upper DU Bushing in the upper collar Increased bushing overlap and durability 100-210mm post lengths in 10mm increments. 20g lighter
OneUp Components 100cc EDC Mini-Pump - a pump to store your tools
The OneUp Components 70cc & 100cc EDC mini-pump are a good alternative if you do not want to store theEDC Toolin the steerer tube. In the handle, there is a cavity for the Everyday Carry Toolset. In the 100cc, a further hollow cylinder, which offers space for cable ties, patches, or other small parts, can be connected. Alternatively, there is also space for a CO2cartridge. The pump head at the other end of the pump can be removed, allowing the pump to be used as a CO2inflator.
Design:mini-pump, CO2 pump Type:high volume Pressure (max.):3.45 bar (50 psi) Valve Head:Presta valve
Dimensions: 32 mm x 178 mm or 32 mm x 254 mm Air Volume: 70cm3 or 100 cm3 Material: Aluminum (6061-T6)
- high volume mini-pump w/ Fast-On valve head, removable - can also be used as a CO2pump - a CO2cartridge (20 g) can be screwed into the cap - storage for the EDC tool (w/ storage capsule but w/o cartridge) - textured surface - fully sealed, weather-proof internals - patent pending - incl. bottle cage mount
Presta Valve: - Synonyms: Sclaverand Valve (SV), French Valve - Outer Diameter: 6.5 mm
Manufacturer Part Number:
- 1 x OneUp Components mini-pump - 1 x pump mount
black/universal: 135 g & 160 g (without EDC Tool System)
The OneUp Components EDC Top Capp with Preload Kit
is an ideal solution for those who want to store the EDC Tool System in the steerer tube, but are afraid to tap a thread. It contains an EDC-compatible Top Cap, headset Preloader, headset spacers (40 mm in total) and an EDC Steerer Plug. With the Top Cap you have the choice between seven attractive colours. The reason why so many Enduro World Series Pro riders use the OneUp EDC Tool in the event of a mechanical is because this tool set is right there and contains everything you need. OneUp Components wanted to benefit even more riders - including those with steel and carbon fork steerer - and developed this solution to do so. Important: The whole thing works only with the OneUp stem. This is because it has a recess on the underside of the body into which the Preload Kit is inserted, whereby you adjust the preload via a third screw on the fork steerer clamp. The Preloader consists of a conical split wedge clamp with clamp bolt and nut, which is connected to a conical headset spacer. When you tighten the bolt on the back of the stem, the Preloader closes, the internal cone is tightened and the conical headset spacer is pushed down away from the stem, which preloads the headset. The EDC Steerer Plug is required for stowing the EDC tool system and is compatible with most tapered steerer tubes.
Application: All Mountain, Enduro Top Cap Compatibility: 1 1/8" steerer tube Steerer Plug Compatibility: 1 1/8" - 1.5" tapered steerer tubes
- no need to tap threads in the steerer tube to store EDC Tool - Preload Kit (hidden in headset) preloads the headset via the stem - no Ahead star nut needed, must be removed before installation - incl. shim spacers for clip-in mount on the stem (normal spacers can be used under the stem) - only works with OneUp stems
Required Fork Dimensions:
Steerer Tube Length: 183 - 230 mm Start Nut Diameter: 24.25 mm - 24.80 mm (check with the Go, No-Go tool from the EDC tap kit) Steerer Tube Diameter (min.): 22.1 mm Recommended Steerer Tube Diameter (max.): 31.75 mm - 34.00 mm
- Cannondale Lefty - certain Fox 32 - Fox 34 29" 2012-2015 - Giant Overdrive 2 - w/ SRAM Pike Boost as of 2016 as well as SRAM Lyrik Boost as of 2016 the CO2 cartridges might not have enough space - w/ the Öhlins RXF the EDC plug does not fit
- 1 x OneUp Components top cap - 1 x OneUp Components Preload Kit w/ bolt and locknut - 2 x OneUp Components EDC 5 mm spacers for clip-in mount on stem - 2 x OneUp Components EDC 10 mm spacers for clip-in mount on stem - 1 x OneUp Components steerer plug
OneUp Components Stem - from Conventional to Innovative
The OneUp Components stem can be used everywhere - from trail riding to Enduro racing. You can use it with a conventional fork star nut and Ahead cap like any other stem. But it is also compatible with theEDC Top Cap- interesting for all those who have already taped a thread in their steerer tube. In these two cases, the supplied spacer must be used. Or you can combine the stem with the OneUp EDC Preload Kit (sold separately) if you want to place the EDC Tool Set in your steerer tube without tapping it.
Application:Enduro, All Mountain Design:Ahead Steerer Clamp:1 1/8" Stack Height:38.5 mm Handlebar Clamp:35 mm Lengths:35 mm, 50 mm Angle:0°
- versatile application - conventional installation, assembly with EDC Top Cap or with Preload Kit - 55 mm handlebar clamp width
Manufacturer Part Numbers:
35 mm 0°:1C0520BLK 50 mm 0°:1C0524BLK
- 1 x OneUp Components EDC stem - 2 x M6 x 1 x 16 bolts with washers - 4 x M5 x 0.8 x 15 bolts with washers - 1 x shim for assembly w/o Preload Kit
The OneUp Components Riser handlebars are designed to give you the best possible feel so you can ride longer and more aggressively. Their oval shape combines the advantages of 31.8 mm bars with those of 35 mm bars. They are strong, light, dampen vibrations, reduce arm pump, respond well and are super comfortable. OneUp Components has taken advantage of the properties of carbon to create a more complex design, which increases the performance of the product. The 35 mm clamp area has been reduced and changes into a flattened, rather oval zone before the typical 22.2 mm clamp diameter is reached further out. Thus, this Riser flexes only in the damping direction and the stiffness in the steering remains. There's a reason that freerider Thomas Vanderham says: " The OneUp bar gives me all of the confidence inspiring attributes of a 35 mm bar with a bit of forgiveness engineered in for those big descents. I've been so impressed after putting it through the paces for the last year."
Application:Cross Country, All Mountain, Enduro Width:800 mm Stem Clamp:35 mm Rise:35 mm / 20 mm
Backsweep:8° Upsweep:5° Material:carbon
Weight Limit:120 kg
- an ingenious shape to achieve the right ratio of flex and stiffness - 21 % more vertical compliance (more comfort) than conventional 35 mm handlebars - 28 % steering stiffness (responsiveness) than conventional 35 mm handlebars - black decor, decal kitsold separatelyin six additional colours
OneUp Components EDC Plug & Pliers Kit - take the EDC tool system to the next level
The OneUp Components EDC Plug & Pliers set is the perfect complement to the EDC Tool System. The Jabber Tool fits seamlessly into the EDC housing. The Quick Link pliers are compatible with all 10, 11 and 12-speed master link chains. Both tools and the " bacon strips" fit perfectly into the EDC plastic cylinder and can be taken along on race day.
Function:tubeless tyre plugs, master link pliers Compatibility:OneUp Components EDC tool system
Material:aluminium, steel, composite
- master link pliers for 10-speed, 11-speed, 12-speed - jabber tool for plugging tyres - 15 bacon strips for tubeless use
Manufacturer Part Number:
The OneUp Components EDC Plug & Pliers Set includes: - 1 x OneUp Components Quick Link breaker pliers - 1 x OneUp Components jabber tool - 15 x OneUp Components bacon strips
OneUp Components Lock-On Grips - ergonomic and cool
The OneUp Components single clamp and low profile grips prevent arm pump and hand numbness. The diamond knurled texture with saw-tooth finger ramps and a super tacky 20A compound provide top-level traction. More traction means less death-grip and less arm pump. Even though it's a single-clamp grip, it has the same profile of your beloved double lock-on. To prevent numbness, OneUp replaced the outer clamp with extra rubber. This cushions the palm heel better. Now you can have all the benefits of an ergonomic grip, without the city cruiser look!
Application:Enduro, All Mountain Clamp:inner Length:136 mm Diameter:30 mm
Material:rubber (20A compound)
- diamond knurled texture, saw-tooth finder ramps and 20A compound for ultimate traction - prevent arm pump and numb hands - extra rubber cushioning instead of outer clamp
By any carbon wheelset or upgrade any bike to carbon wheelset in July and we will supply and install (on full bike or if tires are purchased or supplied) a set of Cushcore of your choice (Pro or XC) for you totally free of charge.